NEW
3DeVOK MT Gen2 Advanced 3D Scanner
Buy Now
Freedom to Move. Built to Perform.
3DeVOK Airgo Wireless Handle
Designed for Large Objects & Outdoor Scanning
Built for the M Series 3D Scanners
Thoughtfully Designed for a Perfect Fit.
Thoughtfully Designed for a Perfect Fit.
Detachable Battery Pack for Quick Swaps
Ergonomic Rear-clip Design for Secure Handling
Flexible Switch Between Wired and Wireless Modes
Proven Across Diverse Applications
- Human Body Scanning
- Large-Scale Parts
- Outdoor Projects
- Automotive Customization
Go Wireless. Scan Freely.
Tailored for the 3DeVOK
• 3DeVOK Airgo Wireless Handle
• Custom-Built for Large Objects & Outdoor Scanning
• Custom-Built for Large Objects & Outdoor Scanning
Dual Battery Power for Extended Runtime
• 3DeVOK Airgo Wireless Handle
• Custom-Built for Large Objects & Outdoor Scanning
• Custom-Built for Large Objects & Outdoor Scanning
High-Speed and Stable Transmission
• 3DeVOK Airgo Wireless Handle
• Custom-Built for Large Objects & Outdoor Scanning
• Custom-Built for Large Objects & Outdoor Scanning
- Tailored for the 3DeVOK
- Dual Battery Power for Extended Runtime
- High-Speed and Stable Transmission
Start Wireless Scanning in 4 Easy Steps
01
Connection Setup
For first-time use, connect the device to a computer via cable and complete setup using either a router or wireless adapter. Router mode is recommended for easier and more stable operation.
02
Install Accessories
Install the positioning accessory and battery securely before use.
03
Pair the Handle & Scanner
Attach and pair the handle with the scanner, then connect the cable to complete the hardware setup.
04
Complete Device Connection
Complete the connection based on your selected setup method and begin wireless scanning.
Want to Learn More?
Technical Specifications
| 3DeVOK Airgo 无线手柄 | |||
|---|---|---|---|
|
Model
|
3DeVOK Airgo | ||
|
WiFi Protocol (Router&Adapter)
|
WiFi 6 | ||
|
Frequency (Router&Adapter)
|
5GHz | ||
|
Wireless Transmission Rate
|
Laser - Marker Alignment: Up to 75 FPS Infrared Speckle / Laser Hybrid Alignment (Router mode): Up to 30 FPS Infrared Speckle / Laser Hybrid Alignment (Network adapter mode): Up to 15 FPS |
||
|
Transmission Distance
|
10 Meters (Line of sight) | ||
|
Battery Type
|
Lithium Battery (Model: Nitecore NL2160 (to be purchased separately)) | ||
|
Battery Capacity
|
6000mAh (Each), 2 Batteries Included | ||
|
Battery Life
|
2 Hours (with 2 batteries) | ||
|
Charging Time
|
4–5 Hours (for 2 batteries) | ||
|
Power & Data Interface
|
Battery Charger | ||
|
Power & Data Interface
|
Type-C | ||
|
Phone Mount
|
Magnetic Type | ||
|
Battery Cover
|
Snap-on Design | ||
|
Power/Scan Button
|
Mechanical Type | ||
|
Dimensions
|
204*138*64 mm | ||
|
Weight
|
390 g (with 2 batteries) | ||
|
Operating Humidity
|
10% ~ 90%RH (Non-condensing) | ||
|
10% ~ 90%RH (Non-condensing)
|
0~40°C | ||
|
Ingress Protection
|
IP50 | ||
|
Compatible Products
|
3DeVOK MT Gen2, 3DeVOK MT, 3DeVOK MQ | ||
|
★Wireless Hardware Version: Supports multiple connection modes, including computer hotspot, 4-meter USB cable (wired), and router-based connection (router sold separately). Modes can be flexibly switched as needed.
★Wired Transmission Rate: – Laser – Marker Alignment: Up to 75 FPS – Infrared Speckle & Laser Hybrid Mode: Up to 30 FPS |
|||
FAQ
Does the WIFI network card and router equipped with the Airgo support self-purchase and replacement? What are the requirements for the replacement models?
The Airgo is recommended to be used with the officially suggested WIFI network card and router.
The recommended WIFI network card is the TP-Link Archer T3U, and the recommended router is the GL.iNet GL-MT3000.
If the above models are not available in your region, the selection of an alternative WIFI network card should primarily be based on driver-supported chips.
For example, chips such as RTL8812AU, RTL8822BU, and MT7921AU are compatible and can be used.
The mandatory requirement for replacing the router is that its transmission speed must be above 40 MB/s.
A gigabit router is recommended for better performance, but it is not a strict requirement.
Note: If users replace the WIFI network card and router on their own, the stability of data transmission cannot be guaranteed.
When using a 3DeVOK series scanner with the wireless Airgo for scanning, after powering on by long-pressing the power button, the power indicator light turns on, and the scanner's touchscreen startup icon lights up. However, the middle indicator light does not illuminate, and the scanner automatical
It is most likely due to a loose power connection. Please check if the two power interfaces marked in the figure are securely connected. If there is a lanyard, lift the lanyard upward, then firmly insert the cable, tighten the screws, and ensure that both ends of the cable are not loose. Then try powering on again.
